NEW EQUIPMENT FOR SALE

Get a Quote For Your Project

Kenworth T880 Pump Truck

CLICK FOR MORE DETAILS

TEE Pump Truck on Kenworth T880 Chassis 

Kenworth T880 Chassis 

  • 2020 Kenworth T880 Chassis 
  • Cummins X15 Engine-485 HP 
  • 20K Front Axle 
  • 46k Rear Axle 
  • RTLO16913A-13 Speed Transmission 
  • White Exterior 
  • Chrome front wheels 
  • Steel Rear wheels 
  • FET Included for chassis 
  • Additional specs available upon request

TEE Pump Truck Rigging 

  • Gardner Denver TEE 4×5 Triplex Pump 
  • 4” Plungers 
  • 5” Stroke 
  • Plunger Lubrication System 
  • Oil Bath Chain Case 
  • Dana-Spicer 784 Auxiliary Transmission 
  • 4×5 Centrifugal Pump (Hydraulic Driven) 
  • Bowie Gear Pump (Hydraulic Driven) 
  • Hydraulic System (Pumps, Motors, Valves, Tanks, Etc.) 
  • 5K Pop-Off Valve 
  • All Controls Mounted Inside Cab 
  • 6,000lb Mud gauge
  • Headache Rack with (2) working lights 
  • Junk Box 18”x18”x24” Toolbox 
  • Holland Kompensator 5th Wheel 
  • 2” Turbine Flow Meter (Read-Out Mounted in Cab) 
  • Full Length Fenders 
  • 4” Manifold with 3” Outlets 
  • 4” C&C Butterfly Valves 
  • 3” Brass Quick Couplers Mud Flaps 
  • 2” Discharge Line with Chicksan 
  • Sandblast, Prime, and Paint complete unit to customer specifications (Excludes Cab) 
  • 10 Joints 2″X 10′ Hardline quoted in price

For Inquiries, Please Contact Butch Bawcom at (806)598-0394

TEE Pump Truck (1)

CLICK FOR MORE DETAILS

TEE Pump Truck Rigging Rigged Out on 2020 Mack GR64FT Granite Chassis

2020 Mack GR64FT Granite Chassis 

  • 2020 Mack GR64FT Granite Chassis 
  • Mack Engine-455 HP 18K Front Axle 44k Rear Axle Mack- 
  • 10 Speed Transmission 
  • White Exterior 
  • FET Included for chassis 
  • Additional specs available upon request

TEE Pump Truck Rigging 

  • Gardner Denver TEE 4×5 Triplex Pump 
  • 4” Plungers 
  • 5” Stroke 
  • Plunger Lubrication System 
  • Oil Bath Chain Case 
  • Dana-Spicer 784 Auxiliary Transmission 
  • 4×5 Centrifugal Pump (Hydraulic Driven) 
  • Bowie Gear Pump (Hydraulic Driven) 
  • Hydraulic System (Pumps, Motors, Valves, Tanks, Etc.) 
  • 5K Pop-Off Valve 
  • All Controls Mounted Inside Cab 
  • 6,000 lb Mud gauge 
  • Headache Rack with (2) working lights 
  • Junk Box 
  • 18”x18”x24” Toolbox 
  • Holland Kompensator 5th Wheel 
  • 2” Turbine Flow Meter (Read-Out Mounted in Cab) 
  • Full Length Fenders 
  • 4” Manifold with 3” Outlets
  • 4” C&C Butterfly Valves 
  • 3” Brass Quick Couplers 
  • Mud Flaps 
  • 2” Discharge Line with Chicksan 
  • 10 Joints- 2″ X 10′ Hardline with Unions
  • Sandblast and paint to customer colors (Excludes Cab) 

For Inquiries, Please Contact Butch Bawcom at (806)598-0394

TEE Pump Truck (2)

CLICK FOR MORE DETAILS

2020 Mack GR64FT Granite Chassis 

  • 2020 Mack GR64FT Granite Chassis 
  • Mack Engine-455 HP 18K Front Axle 44k Rear Axle Mack- 
  • 13 Speed Transmission 
  • White Exterior 
  • FET Included for chassis 
  • Additional specs available upon request

TEE Pump Truck Rigging 

  • Gardner Denver TEE 4×5 Triplex Pump 
  • 4” Plungers 
  • 5” Stroke 
  • Plunger Lubrication System 
  • Oil Bath Chain Case 
  • Dana-Spicer 784 Auxiliary Transmission 
  • 4×5 Centrifugal Pump (Hydraulic Driven) 
  • Bowie Gear Pump (Hydraulic Driven) 
  • Hydraulic System (Pumps, Motors, Valves, Tanks, Etc.) 
  • 5K Pop-Off Valve 
  • All Controls Mounted Inside Cab 
  • 6,000 lb Mud gauge 
  • Headache Rack with (2) working lights 
  • Junk Box 
  • 18”x18”x24” Toolbox 
  • Holland Kompensator 5th Wheel 
  • 2” Turbine Flow Meter (Read-Out Mounted in Cab) 
  • Full Length Fenders 
  • 4” Manifold with 3” Outlets
  • 4” C&C Butterfly Valves 
  • 3” Brass Quick Couplers 
  • Mud Flaps 
  • 2” Discharge Line with Chicksan 
  • 10 Joints- 2″ X 10′ Hardline with Unions
  • Sandblast and paint to customer colors (Excludes Cab) 

For Inquiries, Please Contact Butch Bawcom at (806)598-0394

2020 T800 Kenworth Hot Oil Unit

CLICK FOR MORE DETAILS

New 2020 T800 Kenworth Hot Oil Unit
T800 Chassis
Cummins X15 Engine -485 HP
Fuller 13 Speed Transmission
20 K Front Axle
46 K Rear Axles
Double Framed
Vantage Daycab
Aluminum Front Wheels -Steel Rear Wheels

Heat Exchange System
Propane Fired Burner
7 Million BTU rated input with 5.8 million BTU output
Schedule 80 Coils

75 Bbl. Round Service Tank with sight glasses and cat walk

High Pressure Pump: New TEE-3 x 5 Gardner Denver pump with high pressure cast steel fluid-end
3” Steel Plungers
5” Stroke

Loading and unloading connections on each side and rear of unit

3” Bowie Pump that is Direct Driven
10″ Centrifugal Pump that is Belt Driven

High Pressure 2” Manifold
Low Pressure 2” Manifold

2” Flow Meter with Digital Read-Out

(8) 1 ½” x 13’ Schedule 80 seamless pipes mounted on side of tank

Weatherproof Stainless Steel Operator’s Control Station

500 Gallon propane tank mounted behind service tank

Work Lights and Tool Boxes lined with Protective Coating and Lights for Night Operations
Fire Extinguishers for Safety

Unit Painted to Customer Specifications and Scheme

This Truck Can Be Ready to Roll in Just Three Weeks’ Time!

For Inquiries, Please Contact Butch Bawcom at (806) 598-0394

2020 T800 Kenworth Hot Oil Unit

CLICK FOR MORE DETAILS

New 2020 T800 Kenworth Hot Oil Unit
T800 Chassis
Cummins X15 Engine -485 HP
Fuller 13 Speed Transmission
20 K Front Axle
46 K Rear Axles
Double Framed
Vantage Daycab
Aluminum Front Wheels -Steel Rear Wheels

Heat Exchange System
Propane Fired Burner
7 Million BTU rated input with 5.8 million BTU output
Schedule 80 Coils

75 Bbl. Round Service Tank with sight glasses and cat walk

High Pressure Pump: New TEE-3 x 5 Gardner Denver pump with high pressure cast steel fluid-end
3” Steel Plungers
5” Stroke

Loading and unloading connections on each side and rear of unit

3” Bowie Pump that is Direct Driven
10″ Centrifugal Pump that is Belt Driven

High Pressure 2” Manifold
Low Pressure 2” Manifold

2” Flow Meter with Digital Read-Out

(8) 1 ½” x 13’ Schedule 80 seamless pipes mounted on side of tank

Weatherproof Stainless Steel Operator’s Control Station

500 Gallon propane tank mounted behind service tank

Work Lights and Tool Boxes lined with Protective Coating and Lights for Night Operations
Fire Extinguishers for Safety

Unit Painted to Customer Specifications and Scheme

This Truck Can Be Ready to Roll in Just Three Weeks’ Time!

For Inquiries, Please Contact Butch Bawcom at (806) 598-0394

Your Details

Let us know how to get back to you.


How can we help?

Feel free to ask a question or simply leave a comment.


202 Hulon Moreland Road, Levelland, TX 79336

1-855-EQUIP-US

Interested In Allied Oilfield Equipment?

Are you interested in our new and/or equipment? Please feel free to let us know how Allied can take your company to the next level. Allied has been striving to provide customers with the latest technologies in the Oil and Gas Industry and has backed it with quality customer service and support.

Visit Us On TwitterVisit Us On FacebookVisit Us On Linkedin